Cisco UCS and DCO 8.3.2 synchronization settings

Timothy_Gilbert · ‎2020-04-07

Hello,

Are there synchronization settings specific to adding Cisco UCS to DCO through the external system menu? Do the same polling and synchronization settings apply just like if any other external system was being added?

Jef · ‎2020-04-14

Hi Timothy,

User configurable settings for this integration is: compute power data interval and timeout settings.

Changes in the real model expected to be populated in DCO (or ITA) within a few minutes time.

A particular job check for UCS integration running every 5 min. to update the information between the UCS manager (as integrated external system) and DCO (or ITA).

Kind regards

See Answer In Context

Jef · ‎2020-04-14

Hi Timothy,

User configurable settings for this integration is: compute power data interval and timeout settings.

Changes in the real model expected to be populated in DCO (or ITA) within a few minutes time.

A particular job check for UCS integration running every 5 min. to update the information between the UCS manager (as integrated external system) and DCO (or ITA).

Kind regards

Timothy_Gilbert · ‎2020-04-14

Jef,

Thank you for the response, all set now.

Jef · ‎2020-04-17

Hi Timothy,

You are most welcome.

Kind regards