Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
new X80 Advanced RTU Module BMENOR2200H
Alliance System Integrators Forum
A forum for Schneider Electric’s Alliance System Integrators to share best practices, information, documents, event details, and business opportunities.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Link copied. Please paste this link to share this article on your social media post.
The Modicon X80 Advanced RTU BMENOR2200H module has been released and is supported in the Modicon M580 PAC platform. It offers more advanced features that the previous Modicon RTU Module, the BMXNOR0200H. The BMENOR2200H provides better performance and feature including a more cyber secured design. It complies with TLS/SA RTU protocols.
The first initial release of BMENOR2200H on April 2020 supports DNP3 SAv2/5 in a Modicon M580 PAC standalone CPUs. The current release adds the IEC60870-5-104 protocol plus Hotstanby configuration. There are no commercial and hardware change. In fact, the initial version of the module can be upgraded via firmware to upgrade the features with the current version. The BMENOR2200H can also be used in the Modicon M580 Safety controllers as it is considered as a Non-Interfering Type 1 (certified by TÜV Rheinland).
The BMENOR2200H is plugged into the local Ethernet Backplane, allowing remote devices to easily access the NOR module with less wiring.
DTM with EcoStruxure Control Expert is used to configure the BMENOR2200H. Along with this, a new version of the DTM can support Microsoft Excel file, allowing customers to leverage their Excel skills for bulk RTU configurations.
The new BMENOR2200H supports the following:
- DNP3 NET Server, supporting SAv2/5 (SV1.0)
- DNP3 NET Client, supporting SAv2/5 (SV1.0)
- IEC60870-5-104 Server, supporting redundant connections
- IEC60870-5-104 Client
- TLS for DNP3/IEC60870-5-104 (Self-Signed or CA)
- Modbus TCP Server (Local) (SV1.0)
- Modbus TCP Client (SV1.0)
- HTTPS server for web page (SV1.0)
- SNTP Client (SV1.0)
- SNMP Agency (SV1.0)
- System Log (SV1.0)
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.