Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84519members
353747posts

Trio How-To Videos

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

Solved
Joel_Weder
Commander Commander
Commander
7
2073

Trio How-To Videos

The Schneider Electric YouTube channel has helpful short videos discussing features and capabilities of many of our products and solutions. You can find our channel, and subscribe if you like, simply by going to youtube.com and doing a search for "Schneider Electric channel."  

 

Numerous Trio videos have already been created, and more are coming. Here is a list of videos as of March 2020:

 

Quick-Start Videos:
Trio Q Series Licensed Radio – Wizard Demonstration               https://www.youtube.com/watch?v=O2orINBzzyE

Trio K Series License-Free Radio – Wizard Demo                       https://www.youtube.com/watch?v=I1uZ7ZB2vBw

Trio M Series Licensed Radio - Basic Configuration                   https://www.youtube.com/watch?v=UvHjz-NOBwE

Trio J Series Configuration and TView+ Diagnostics                   https://www.youtube.com/watch?v=9bz_TpZYn40

 

General Ethernet Radio Info:
Trio Ethernet Radios – Internal Diagnostic Features                   https://www.youtube.com/watch?v=xDkGOsxPxIU

Trio Ethernet Radios - Modbus Gateway and Serial Server        https://www.youtube.com/watch?v=Ys-HNGLQv0k

Q Series Data Radio:
Global Firmware Updating for the Trio Q Data Radio                 https://www.youtube.com/watch?v=wgtK_jl_YnA

Trio Q Data Radio – IP Routing Benefits & Configuration           https://www.youtube.com/watch?v=sot8NgDrusw

Trio Q Series Licensed Radio – Dynamic Speed Mode              https://www.youtube.com/watch?v=qohNvrQgrHg

Trio Q VHF Data Radio - Advantages and New Features           https://www.youtube.com/watch?v=cl8yL1aPJQ8

Trio Q Data Radio Alarms and Events                                        https://www.youtube.com/watch?v=GzxzoiLm8Qc
Trio Q Data Radio Compatibility with Trio E Series                     https://www.youtube.com/watch?v=zlPooeEyOgk
Trio Q Data Radio - Multi-User Access                                       https://www.youtube.com/watch?v=U0uyjl_6hSA

The Trio Q Data Radio Text User Interface                                 https://www.youtube.com/watch?v=vILlyk5CAC0

Create a Trio Q Data Radio Point to Point Network                     https://www.youtube.com/watch?v=iEkbF11g-No

 

J Series Data Radio:

Trio J Data Radio - Setup a Point to Point Network                     https://www.youtube.com/watch?v=FPbFYjj8KWY

Trio J Data Radio Spectrum Analyzer & Channel Lockout          https://www.youtube.com/watch?v=g8Sv88mxkj0

 

Joel Weder
Remote Operations Specialist
Schneider Electric
Tags (1)

Accepted Solutions
MartinChartrand
Captain Captain
Captain
5
2050

Re: Trio How-To Videos

Thanks Joel. Further to your post, a new Trio Data Radios playlist has been created on our YouTube channel for all the current videos and videos to come.

 

Please use this link and bookmark the playlist in your browser:

 

https://www.youtube.com/playlist?list=PLa7UGrWOTyjlpwf0J9GEFDovU9vFKYM6l

 

Regards,

Martin Chartrand

SCADA & Telemetry Solution Specialist

 

 

See Answer In Context

7 Replies 7
Omaelk
Administrator Administrator
Administrator
0 Likes
0
2071

Re: Trio How-To Videos

Thanks for sharing this playlist of videos @Joel_Weder 🙂

 

 

MartinChartrand
Captain Captain
Captain
5
2051

Re: Trio How-To Videos

Thanks Joel. Further to your post, a new Trio Data Radios playlist has been created on our YouTube channel for all the current videos and videos to come.

 

Please use this link and bookmark the playlist in your browser:

 

https://www.youtube.com/playlist?list=PLa7UGrWOTyjlpwf0J9GEFDovU9vFKYM6l

 

Regards,

Martin Chartrand

SCADA & Telemetry Solution Specialist

 

 

Rich-C
Ensign
Ensign
0 Likes
4
595

Re: Trio How-To Videos

Hello, I am having a hard time mapping trio jr900 access point radio to geo scada. can you help with this?

Joel_Weder
Commander Commander
Commander

Re: Trio How-To Videos

Hello Rich,

 

Can you please be more specific?  What do you mean by "mapping" ?  Are you just trying to use the JR900 radios to transport Ethernet traffic between Geo SCADA and some end devices? The radios are really just transparent, and there is a Wizard mode in Setup to help with that. (plus a few videos on YouTube)

 

Or are you attempting to set up diagnostics for the Trio radios within Geo SCADA? If this is what you mean, you can do it either of two ways:

- make use of the already-created template and modify it as needed. (I can send that if desired)

- Or configure manually with a Trio channel, Set, Radio and points, then use those as any points would normally be displayed

 

Joel Weder
Remote Operations Specialist
Schneider Electric
Rich-C
Ensign
Ensign
0 Likes
2
589

Re: Trio How-To Videos

My apologies, Yes I am trying to set up diagnostics for the trio radios in Geo Scada. I already have the Tview+ Diagnostics software installed and working perfectly. 

 

 I would like to configure manually with a Trio channel, Set, Radio and points.

 

Thanks again Joel. 

Joel_Weder
Commander Commander
Commander
0 Likes
1
585

Re: Trio How-To Videos

I will post a new forum topic with a more appropriate title, so others can find and make use of this information also. It will be called "Geo SCADA Diagnostics for Trio J Series"  Will be posted shortly.

 

Joel Weder
Remote Operations Specialist
Schneider Electric
Rich-C
Ensign
Ensign
0 Likes
0
581

Re: Trio How-To Videos

Great.

 

 

Thanks again for the quick response.