Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84400members
353588posts

SCADAPack C and C++ Tools now available as free downloads on SHOP!

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

MartinChartrand
Captain Captain
Captain
0 Likes
0
416

SCADAPack C and C++ Tools now available as free downloads on SHOP!

Hello Community,
SCADAPack C/C++ Tools are ideal for engineers and programmers who require advanced programming tools for SCADA applications and process control, beyond the SCADAPack Smart RTU's built-in Telepace and IEC61131-3 logic functionality. A SCADAPack Smart RTU or 4203 Gas Flow Computer executes Telepace Ladder or IEC 61131-1 control logic and up to 32 C++ application programs simultaneously, providing you with maximum flexibility in implementing your control strategy.

 

We have made the following C and C++ Tools packages available as free downloads on Shop. Each package supports specific SCADAPack Smart RTUs.

 

Legacy 16-Bit SCADAPack RTUs:
SCADAPack C Tools: <click here> 

 

This software package provides software tools (function libraries) for creating a C logic control application for legacy 16-bit SCADAPack Smart RTUs such as the SCADAPack 100, Micro 16, SCADAPack Light, SCADAPack Plus and SCADAPack LP. The single C logic application runs concurrently with the existing Telepace Studio ladder logic or IEC61131-3 Workbench application.

 

Notes:

- The compiler is not included in this download package and must be purchased separately: part number: TBUM327090.
- The version of software included in this download is 2.50.2.

 


Standard SCADAPack 300 Smart RTUs and 4203 Gas Flow Computer:
SCADAPack C++ Tools: <click here> 

 

This software package provides the open-source GNU C++ compiler and function libraries for 32-bit standard SCADAPack 300 Smart RTUs and 4203 Gas Flow Computer. A SCADAPack 300 Smart RTU or 4203 Gas Flow Computer executes Telepace Ladder or IEC 61131-1 control logic and up to 32 C++ application programs simultaneously.

 

Note: The version of software included in this download is 1.77.


SCADAPack C++ Tools for SCADAPack 32 Smart RTUs:
SCADAPack 32 C++ Tools: <click here> 

 

This software package provides software tools (function libraries) for creating a C++ logic control application for SCADAPack 32 Smart RTUs. The single C++ logic application runs concurrently with the existing Telepace Studio ladder logic or IEC61131-3 Workbench application.

 

Notes:

- The compiler is not included in this download package and must be purchased separately: part number: TBUM327094.
- The version of software included in this download is 2.24.

 

 

Thank you

Martin Chartrand