Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84865members
354358posts

New RemoteConnect DNP3 Basics videos

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

Solved
MartinChartrand
Captain Captain
Captain
0 Likes
5
2055

New RemoteConnect DNP3 Basics videos

Hello everyone,

Patrick McGrath has added two new videos to his excellent series of RemoteConnect instructional videos. These two are the first in a series related to DNP3 Basics as they relate to the RemoteConnect application for SCADAPack x70 Smart RTUs.

 

Links to the individual videos and the new DNP3 Basics Youtube playlist, as well as the existing RemoteConnect Getting Started playlist are below.

 

 

RemoteConnect DNP3 Basics Part 1: Introducing the Test Case: https://youtu.be/zPT29LY4RcY

 

Remote Connect DNP3 Basics Part 2: Data Classes and Events: https://youtu.be/rNWHjvgNY6E

 

RemoteConnect DNP3 Basics YouTube Playlist: https://www.youtube.com/playlist?list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS

 

RemoteConnect Getting Started YouTube Playlist: https://www.youtube.com/playlist?list=PLa7UGrWOTyjlyww9RcENfi8u9i8SKPZ0c

 

 

Regards,

M

 


Accepted Solutions
MartinChartrand
Captain Captain
Captain
0 Likes
1
2052

Re: New RemoteConnect DNP3 Basics videos

Hello all,

Just an additional note about these videos.

Although the SCADAPack 47x Smart RTU is referenced in these videos, the product is not released yet. We're looking at a 3rd-quarter 2020 release date at this time.

However, any DNP3 functionality demonstrated here in RemoteConnect can be applied to the SCADAPack 57x Smart RTUs, which is currently available.

Regards,

Martin Chartrand

See Answer In Context

MartinChartrand
Captain Captain
Captain
0 Likes
2
2037

Re: New RemoteConnect DNP3 Basics videos

Hello all,

An audio error has been detected in Remote Connect DNP3 Basics Part 2: Data Classes and Events.

We have taken the video down temporarily until such time as the error is corrected. This should be done within the next week.

We apologize for the inconvenience and also thank the eagle-eyed (eared?) viewer who caught the error.

Thank you.

Martin Chartrand

See Answer In Context

5 Replies 5
MartinChartrand
Captain Captain
Captain
0 Likes
1
2053

Re: New RemoteConnect DNP3 Basics videos

Hello all,

Just an additional note about these videos.

Although the SCADAPack 47x Smart RTU is referenced in these videos, the product is not released yet. We're looking at a 3rd-quarter 2020 release date at this time.

However, any DNP3 functionality demonstrated here in RemoteConnect can be applied to the SCADAPack 57x Smart RTUs, which is currently available.

Regards,

Martin Chartrand

MartinChartrand
Captain Captain
Captain
0 Likes
2
2038

Re: New RemoteConnect DNP3 Basics videos

Hello all,

An audio error has been detected in Remote Connect DNP3 Basics Part 2: Data Classes and Events.

We have taken the video down temporarily until such time as the error is corrected. This should be done within the next week.

We apologize for the inconvenience and also thank the eagle-eyed (eared?) viewer who caught the error.

Thank you.

Martin Chartrand

fcantrell
Ensign
Ensign
0 Likes
0
1997

Re: New RemoteConnect DNP3 Basics videos

Thanks for the videos. They are a great help. Keep them coming!

 

Floyd Cantrell

MartinChartrand
Captain Captain
Captain
0 Likes
1
1992

Re: New RemoteConnect DNP3 Basics videos

Hello again,

DNP3 Basics video part 2 has been corrected and now is available from either its direct link, or the two YouTube playlists as per below.

Thank you!

Martin

 

 

RemoteConnect DNP3 Basics Part 2 - Data Classes and Events:

https://www.youtube.com/watch?v=tOXk3Un49fk&list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS&index=3&t=123s

 

 

RemoteConnect DNP3 Basics Playlist:

https://www.youtube.com/playlist?list=PLa7UGrWOTyjkCEOPlYRwAOB7GGFoLy5WS

 

 

RemoteConnect Getting Started Instructional Videos Playlist:

https://www.youtube.com/playlist?list=PLa7UGrWOTyjlyww9RcENfi8u9i8SKPZ0c

 

 

 

DavidSkilbeck
Lt. Commander
Lt. Commander
0 Likes
0
1693

Re: New RemoteConnect DNP3 Basics videos

Hello @MartinChartrand,

do any of these videos cover DNP3 file transfer (File Upload).

 

Thanks,

Tags (1)