Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel

[Imported] SmartCable Universal Interface cable driver

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

Janeway Janeway

[Imported] SmartCable Universal Interface cable driver

>>Message imported from previous forum - Category:Accutech<<
User: mchartrand, originally posted: 2018-10-17 19:08:09 Id:90
This is a re-posting from the obsoleted (October 2018) "Schneider Electric Telemetry & SCADA" forum.


I am looking for a driver to connect to a BR10 using CMI smart cable with model # CMI-SMARTCABLE. The one i load did not work and the universal looks different from the one from Microflex. When i connect it does not assign a com port in device manager._**


The adapter used in the CMI-SMARTCABLE was never supported on Windows Vista, Windows 7 or higher which prompted the development of the Microflex USB adapter for Accutech.

You will be better off using the Microflex universal cable or some other USB adapter that is supported with your O/S.