Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84257members
353354posts

[Imported] Help on AT Commands

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

sbeadle
Janeway Janeway
Janeway
0 Likes
0
385

[Imported] Help on AT Commands

>>Message imported from previous forum - Category:Communications Products <<
User: mchartrand, originally posted: 2018-10-25 15:58:31 Id:230
This is a re-posting from the obsoleted (October 2018) "Schneider Electric Telemetry & SCADA" forum.

_______

**_jaydac12:
Greetings,
Just wanted to ask about AT commands. Is there a way to get the details about the last call made? like call duration and such. And if the call has ended. The modem does not send out response that the call has ended.
Thanks._**

_______

bevanweiss:
Here's a link to a basic AT command set reference
[http://michaelgellis.tripod.com/modem.html](http://michaelgellis.tripod.com/modem.html "http://michaelgellis.tripod.com/modem.html")

From that you will not see what you are after. So the answer is no, the standard widely supported AT command set will not give you this.

Now... like with all good standards, no manufacturer follows this precisely, so almost every device manufacturer will have their own proprietary AT commands also.. sometimes these are adopted by more people and they become their own standard of extensions.
Here's a version for GSM
[http://www.zeeman.de/wp-conten...cs-at-command-set.pdf](http://www.zeeman.de/wp-conten...cs-at-comma... "http://www.zeeman.de/wp-conten...cs-at-command-set.pdf")

If you advise what particular model of modem you're using, then someone might have more of an idea if that manufacturer has an AT command to access the call list.