Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel

[Imported] Cybertec SMM-200 Replacement Paging Modem having issues

Remote Operations Forum

Collaborate and share knowledge on the extensive range of remote systems and devices, including SCADA radios and RTUs, on the Schneider Electric Exchange Remote Operations (formerly SCADA & Telemetry) forum. From commissioning SCADA integration devices and software, to enhancing existing installations or troubleshooting, connect with a global community of experts and users. Subscribe today.

Janeway Janeway

[Imported] Cybertec SMM-200 Replacement Paging Modem having issues

>>Message imported from previous forum - Category:Communications Products <<
User: mchartrand, originally posted: 2018-10-25 15:46:55 Id:224
This is a re-posting from the obsoleted (October 2018) "Schneider Electric Telemetry & SCADA" forum.


Looking to replace a existing SMS paging modem with a Cybertec SMM-200 and when connected to ClearSCADA having a SMS Pager Channel Error - GSM Modem poll failed.
Any ideas?
I am able to send SMS via AT commands in Hyperterminal and have the SMS Channel connection settings the same as those successfully usued in Hyperterminal. I am setting ATV1E0 in the modem command.
Any help appreacited as I am already using these modems elsewhere and would prefer not to need to stock something different_**


Hello PaulD,

Have you had any luck with the trouble?

I am also trying to use a cybertec 2220 modem with clearscada to send sms and having exactly the same issue.

Any help would be appreciated.


I wasn't ablt to get the Cybertec to work as expected so ended up using a Schneider SR02 MOD02 which worked straight out of the box.
Apologies for taking so long to reply._**