Netbotz 550 getting error "/dev/gpio3: no space left on device "while booting

Tayyab · ‎2023-03-20

Hi ,

Anyone can please help me how the subjected issue could be resolved ?

Rgds

Tayyab

Cory_McDonald · ‎2024-10-01

I'm not sure what would cause this on the 550, but due to the age of the appliance and the 550 being end-of-life, I would likely recommend the quickest solution of doing a factory reset, reconfiguring, and seeing if the issue presents itself again.

Factory Reset: https://www.apc.com/us/en/faqs/FA158175/

Configuring Network Settings: https://www.apc.com/us/en/faqs/FA308010/

Other help can be found in APC FAQs: https://www.apc.com/us/en/faqs/search/?q=NetBotz+v3

Kind Regards,

Cory

See Answer In Context

Cory_McDonald · ‎2024-10-01

Hello @Tayyab,

I'm not sure what would cause this on the 550, but due to the age of the appliance and the 550 being end-of-life, I would likely recommend the quickest solution of doing a factory reset, reconfiguring, and seeing if the issue presents itself again.

Factory Reset: https://www.apc.com/us/en/faqs/FA158175/

Configuring Network Settings: https://www.apc.com/us/en/faqs/FA308010/

Other help can be found in APC FAQs: https://www.apc.com/us/en/faqs/search/?q=NetBotz+v3

Kind Regards,

Cory

Netbotz 550 getting error &quot;/dev/gpio3: no space left on device &quot;while booting

Netbotz 550 getting error "/dev/gpio3: no space left on device "while booting

This is a heading

Netbotz 550 getting error "/dev/gpio3: no space left on device "while booting