Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84588members
353854posts

Offline Map Geo SCADA / ClearSCADA

EcoStruxure Geo SCADA Expert Forum

Find out how SCADA systems and networks, like EcoStruxure Geo SCADA Expert, help industrial organizations maintaining efficiency, processing data for smarter decision making with IoT, RTU and PLC devices.

Solved
Oncom
Commander
Commander
0 Likes
3
1608

Offline Map Geo SCADA / ClearSCADA

Hi Everyone,

 

is it possible to make offline maps in ClearSCADA / GeoSCADA?

 

Thanks

Tags (2)

Accepted Solutions
BevanWeiss
Spock
Spock
2
1604

Re: Offline Map Geo SCADA / ClearSCADA

Hi @Oncom ,

I believe this has been discussed before on the old forums (the one in the middle anyway).

 

Within ClearSCADA this is not currently possible.

However it is possible to use an on-site caching WMS server.  There are a number of open source alternatives out there if you google it.  It would require some more work to set these up, and to appropriate configure caching, etc, but if security is a concern then this should be relatively easy to justify.

 

As WMS etc are layers over regular HTTP(S), then using a simple HTTPS application proxy (Web Proxy) should also be possible as a protection layer.  This would be much more simple to configure, but would require network traffic to be possible between the OT and 'Geo network'.

 

Regards,

Bevan


Lead Control Systems Engineer for Alliance Automation (VIC).
All opinions are my own and do not represent the opinions or policies of my employer, or of my cat..

See Answer In Context

3 Replies 3
BevanWeiss
Spock
Spock
2
1605

Re: Offline Map Geo SCADA / ClearSCADA

Hi @Oncom ,

I believe this has been discussed before on the old forums (the one in the middle anyway).

 

Within ClearSCADA this is not currently possible.

However it is possible to use an on-site caching WMS server.  There are a number of open source alternatives out there if you google it.  It would require some more work to set these up, and to appropriate configure caching, etc, but if security is a concern then this should be relatively easy to justify.

 

As WMS etc are layers over regular HTTP(S), then using a simple HTTPS application proxy (Web Proxy) should also be possible as a protection layer.  This would be much more simple to configure, but would require network traffic to be possible between the OT and 'Geo network'.

 

Regards,

Bevan


Lead Control Systems Engineer for Alliance Automation (VIC).
All opinions are my own and do not represent the opinions or policies of my employer, or of my cat..
Hardin4019
Lieutenant
Lieutenant
0 Likes
1
1576

Re: Offline Map Geo SCADA / ClearSCADA

I think you are referring to a post I started.

 

LINK EDITED BY STEVE:

https://community.exchange.se.com/t5/Geo-SCADA-Expert-Forum/Imported-GIS-Exportable-file-formats-sup...

Oncom
Commander
Commander
0 Likes
0
1552

Re: Offline Map Geo SCADA / ClearSCADA