Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84387members
353577posts

USB shutdown mode

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
BillP
Administrator Administrator
Administrator
0 Likes
1
80

USB shutdown mode

This question was originally posted by Patrick on APC forums on 12/27/2010


Am new to UPS systems, am considering getting a APC back-UPS 700 but want to make sure the USB port and signal is compatible with a Sysnology 410j NAS. The NAS has a input for a UPS USB and will go into a controlled shutdown mode if it receives a low battery signal via USB. Does the APC-UPS support this? There is not chance of installing any additional software on the NAS, so i guess my question is if this is a standard alarm/event which is transmitted via the USB cable and does th e UPS 700 from APC also support this.


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
80

Re: USB shutdown mode

This reply was originally posted by Angela on APC forums on 12/27/2010


yes, APC UPSs support USB and signaling via that but if you could provide us with the documentation on your NAS, that may be better. it also may be worthwhile in checking with the NAS folks on what type of UPS model they recommend and if there are any other details you should know about using a UPS with your NAS.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
81

Re: USB shutdown mode

This reply was originally posted by Angela on APC forums on 12/27/2010


yes, APC UPSs support USB and signaling via that but if you could provide us with the documentation on your NAS, that may be better. it also may be worthwhile in checking with the NAS folks on what type of UPS model they recommend and if there are any other details you should know about using a UPS with your NAS.