Some questions for SUA1500RMI2U

[gdarko]

Hello,

I am about to power on this UPS - it was sitting in our server room for quite some time without use. Now i am about to order batteries for it but first i want to check if it functions properly, I assume it does but for just in case.

The battery pack in the ups is RBC24 - the batteries are removed by our previous employee because they were dead.

My questions. I really appreciate your time.

1. Can I plugin into mains without battery to test if it turns on?

2. Can I install a RBC7 (two batteries from our SMT1500) into the RBC24 just to test out - I see RBC24 cartridge comes with two red wires and two black wires while RBC7 is wired with 60A wiring harness. So should i just plug one red and one black to RBC7 and leave the other couple unplugged. Is it possible to test that way?

Best Regards,

Darko

[BillP]

@gdarko 

Sorry for the delayed reply.

A SUA model Smart-UPS will not power on without a good battery connected. The RBC24 is made up out of qty 4 12v 9 ah batteries. 

I do not recommend connecting any batteries that are not in spec.