Ask Me About Webinar: Data Center Assets - Modeling, Cooling, and CFD Simulation Join our 30-minute expert session on July 10, 2025 (9:00 AM & 5:00 PM CET), to explore Digital Twins, cooling simulations, and IT infrastructure modeling. Learn how to boost resiliency and plan power capacity effectively.Register now to secure your spot!
No Link with APC AP9617 Management Card
APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2811:37 PM. Last Modified: 2024-03-1401:27 AM
No Link with APC AP9617 Management Card
I have an APC 9617 management card, connected in the expansion slot of an APC unit, I can console in using the serial port and assign an IP address/Subnet etc, but when i plug in an ethernet cable, I cannot get the port to light up on my switch, i have tried using different ethernet cables, and various ports on the switch, but no connectivity or link lights. The light on the card's ethernet port on the right side stays steady green, is the card dead?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2811:37 PM. Last Modified: 2024-03-1401:27 AM
I have an APC 9617 management card, connected in the expansion slot of an APC unit, I can console in using the serial port and assign an IP address/Subnet etc, but when i plug in an ethernet cable, I cannot get the port to light up on my switch, i have tried using different ethernet cables, and various ports on the switch, but no connectivity or link lights. The light on the card's ethernet port on the right side stays steady green, is the card dead?
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2811:37 PM. Last Modified: 2024-03-1401:27 AM
I have an APC 9617 management card, connected in the expansion slot of an APC unit, I can console in using the serial port and assign an IP address/Subnet etc, but when i plug in an ethernet cable, I cannot get the port to light up on my switch, i have tried using different ethernet cables, and various ports on the switch, but no connectivity or link lights. The light on the card's ethernet port on the right side stays steady green, is the card dead?
This is a heading
With achievable small steps, users progress and continually feel satisfaction in task accomplishment.
Usetiful Onboarding Checklist remembers the progress of every user, allowing them to take bite-sized journeys and continue where they left.