Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84475members
353693posts

NMC Event Codes

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
bdteets_apc
Cadet
0 Likes
1
247

NMC Event Codes

This was originally posted on APC forums on 12/29/2015


I manage a few Smart UPS units with different versions of NMCs, the most recent being AP9630.

After taking a few years off from this task, I am looking for a list of the event code definitions that include the severity levels,( informational, warning...)   

Any help would be appreciated.  Thanks, Dave

Tags (2)

Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
247

Re: NMC Event Codes

This reply was originally posted by Angela on APC forums on 12/29/2015


Hi Dave,

The easiest way to export the list of possible event codes from the Network Management Card and the device it is installed in would be to download and look at the [EventActionConfig] section down at the bottom of the file. It will have the event code and what the text/explanation is for it. It will also show the notification configuration for each event here. That is the best list we have available beyond what is in the web interface. Unfortunately, the severity for an event isn't listed in config.ini, only in the web listing.

As for definitions, beyond knowing what the event is, we don't have any further definitions of what the events mean as they'll pertain to either UPS components/operation or the management card itself.

If you have events that you'd like to better understand, we can certainly try to help explain them. Some of the information and understanding may exist in the device user guides though i.e. the components and features of a UPS that may generate events.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
248

Re: NMC Event Codes

This reply was originally posted by Angela on APC forums on 12/29/2015


Hi Dave,

The easiest way to export the list of possible event codes from the Network Management Card and the device it is installed in would be to download and look at the [EventActionConfig] section down at the bottom of the file. It will have the event code and what the text/explanation is for it. It will also show the notification configuration for each event here. That is the best list we have available beyond what is in the web interface. Unfortunately, the severity for an event isn't listed in config.ini, only in the web listing.

As for definitions, beyond knowing what the event is, we don't have any further definitions of what the events mean as they'll pertain to either UPS components/operation or the management card itself.

If you have events that you'd like to better understand, we can certainly try to help explain them. Some of the information and understanding may exist in the device user guides though i.e. the components and features of a UPS that may generate events.