Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84580members
353849posts

Monitoring UPS data using SNMP OID

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
Mases_apc
Cadet
0 Likes
1
363

Monitoring UPS data using SNMP OID

This was originally posted on APC forums on 11/3/2015


Dears.. I need to have the APC OID in this format 1.3.6.1.4.1.318.1.1.10.2.3.2.1.4.1 but every APC document has it in text like upsBasicTimeOnBattery and this is not working for me. so how can I get the numerical format for OIDs mentioned in "PowerNet Management Information Base (MIB) Version 3.4.4" document

thanks in advace

Tags (3)

Accepted Solutions
voidstar_apc
Janeway
Janeway
0 Likes
0
363

Re: Monitoring UPS data using SNMP OID

This was originally posted on APC forums on 11/3/2015


You could dig through the MIB, but it's easier to load it into a MIB browser. I use the free GetIF for Windows. Inside GetIF's program folder is a Mibs folder where you can put the MIB, and GetIF will show both the name and the numeric OID.

See Answer In Context

1 Reply 1
voidstar_apc
Janeway
Janeway
0 Likes
0
364

Re: Monitoring UPS data using SNMP OID

This was originally posted on APC forums on 11/3/2015


You could dig through the MIB, but it's easier to load it into a MIB browser. I use the free GetIF for Windows. Inside GetIF's program folder is a Mibs folder where you can put the MIB, and GetIF will show both the name and the numeric OID.