Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84570members
353841posts

9631 SNMP Temperature Values Incorrect

APC UPS Data Center & Enterprise Solutions Forum

Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.

Solved
alanth_apc
Crewman
Crewman
0 Likes
2
240

9631 SNMP Temperature Values Incorrect

This was originally posted on APC forums on 5/10/2013


The APC 9631 network management card with current firmware 5.1.7 outputs the wrong SNMP temperature values if the Temperature Scale preference (Administration> General> Preferences> Temperature Scale:) is set to Fahrenheit for web GUI Environment display.

Per the MIBs SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.5 should always result in temperature display in Fahrenheit and SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.6 should always result in Celsius.

When set to Celsius:

snmpwalk [hostname] -v1 -c public .1.3.6.1.4.1.318.1.1.25.1.2

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.1.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.1.2.1 = INTEGER: 2

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.2.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.2.2.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.3.1.1 = STRING: "Port 1 Temp 1"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.3.2.1 = STRING: "Port 2 Temp 2"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.4.1.1 = STRING: "Port 1"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.4.2.1 = STRING: "Port 2"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.5.1.1 = INTEGER: 77

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.5.2.1 = INTEGER: 77

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.6.1.1 = INTEGER: 25

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.6.2.1 = INTEGER: 25

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.7.1.1 = INTEGER: 38

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.7.2.1 = INTEGER: -1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.8.1.1 = INTEGER: 0

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.8.2.1 = INTEGER: 0

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.9.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.9.2.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.10.1.1 = INTEGER: 2

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.10.2.1 = INTEGER: 2

When set to Fahrenheit:

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.1.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.1.2.1 = INTEGER: 2

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.2.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.2.2.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.3.1.1 = STRING: "Port 1 Temp 1"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.3.2.1 = STRING: "Port 2 Temp 2"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.4.1.1 = STRING: "Port 1"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.4.2.1 = STRING: "Port 2"

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.5.1.1 = INTEGER: 171

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.5.2.1 = INTEGER: 172

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.6.1.1 = INTEGER: 77

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.6.2.1 = INTEGER: 78

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.7.1.1 = INTEGER: 38

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.7.2.1 = INTEGER: -1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.8.1.1 = INTEGER: 0

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.8.2.1 = INTEGER: 0

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.9.1.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.9.2.1 = INTEGER: 1

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.10.1.1 = INTEGER: 2

SNMPv2-SMI::enterprises.318.1.1.25.1.2.1.10.2.1 = INTEGER: 2



Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
239

Re: 9631 SNMP Temperature Values Incorrect

This reply was originally posted by Angela on APC forums on 5/13/2013


we had an issue with this but it was fixed already over a year ago where a double calculation was being performed depending on the preference setting. I know you said this was version 5.1.7 firmware but can you please provide a screenshot of the firmware versions from the web interface under Administration->General->About please.

I just double checked this on my end for sanity's sake knowing it was a non issue these days and verified my temp preference was on Celsius and I am seeing 82 for uioSensorStatusTemperatureDegF and 28 for uioSensorStatusTemperatureDegC as I expect to.

Here is what I am running per sysDescr (.1.3.6.1.2.1.1.1) OID under mib-2 which maybe you can get that instead for me: APC Web/SNMP Management Card (MB:v4.0.1 PF:v5.1.7 PN:apc_hw05_aos_517.bin AF1:v5.1.7 AN1:apc_hw05_sumx_517.bin MN:AP9631 HR:05 SN: BA08XXXXXXX MD:01/16/2009) (Embedded PowerNet SNMP Agent SW v2.2 compatible)

See Answer In Context

2 Replies 2
BillP
Administrator Administrator
Administrator
0 Likes
0
240

Re: 9631 SNMP Temperature Values Incorrect

This reply was originally posted by Angela on APC forums on 5/13/2013


we had an issue with this but it was fixed already over a year ago where a double calculation was being performed depending on the preference setting. I know you said this was version 5.1.7 firmware but can you please provide a screenshot of the firmware versions from the web interface under Administration->General->About please.

I just double checked this on my end for sanity's sake knowing it was a non issue these days and verified my temp preference was on Celsius and I am seeing 82 for uioSensorStatusTemperatureDegF and 28 for uioSensorStatusTemperatureDegC as I expect to.

Here is what I am running per sysDescr (.1.3.6.1.2.1.1.1) OID under mib-2 which maybe you can get that instead for me: APC Web/SNMP Management Card (MB:v4.0.1 PF:v5.1.7 PN:apc_hw05_aos_517.bin AF1:v5.1.7 AN1:apc_hw05_sumx_517.bin MN:AP9631 HR:05 SN: BA08XXXXXXX MD:01/16/2009) (Embedded PowerNet SNMP Agent SW v2.2 compatible)

alanth_apc
Crewman
Crewman
0 Likes
0
241

Re: 9631 SNMP Temperature Values Incorrect

This was originally posted on APC forums on 5/14/2013


My bad - of the many, MANY smart-UPS' that we are monitoring, the ones with the problem are NOT running 5.1.7.  I inadvertently checked firmware on 3 that were not having the problem.  Thanks much.