It's your place to connect with experts and peers, get continuous support, and share knowledge.
Contact SchneiderCommunity.Support@se.com if you have any questions.
I don't often configure meters but had to setup an PM5560 on the network for some BACnet testing and when i went to the web pages i was met with the below, when did this change, is there no way of changing these settings in the web pages ? Also ION S…View more
Find more articles tagged with: english
Hi Does anybody have and expected lifespan in years of Power Meters from installation, for example ION7650, ION7350, PM700 and PM800 series ? Looking at some life cycle replacement works for a client and want to give them the correct figures for the …View more
Hi Whilst looking for some ION9000 specs i noticed this page about Residual Current Measurement: https://www.productinfo.schneider-electric.com/portals/ui/ion9000/viewer/5b92c16783d55700015689f0/5b92c1e783d5570001569240/r/C_Commissioning_ResidualCurr…View more
Is there an effective way of logging energy usage and power on an ION9000 from two different sources ? Situation is that we have a site with a generator and mains incoming supply both upstream of the ION9000 with one set of CT's and Vrefs, can we giv…View more
Having a bit of an issue with ION9000 NTP I have a Windows server on the network functioning as an NTP server which is all setup fine, however the ION9000 will only update its time against the NTP server on meter reboot. I have checked the clock modu…View more
I notice the RD192 has an auxiliary power port for 24VDC but the manual doesn't really give much of a clue when its to be used or not The specs for the screen state its PoE so i'm presuming when using the B2B adaptor or direct CAT5 from meter body to…View more
Hi, i was looking for the latest firmware version for the EGX150 and found it here: https://www.schneider-electric.co.uk/en/download/document/FW_v5.0.29/ However there is no changelog document with it, is there a version changelog for the EGX150 anyw…View more
We have a client who has done a vulnerability scan on the network where we have a few devices connected to their network (specification was for an integrated building network) the one device that's causing issues for us is the PM8000 and they are cla…View more
Is my unit broken or am i missing something ? Is it because i have configured meters/gateways on it that it can't see, have i missed a setting ? What are the issues that cause such long reboot times ?Out of the box boot time seems to be around 5 mins…View more
Can anybody tell us the MTBF of the EGX150, we have drawn a blank looking for the info ourselves, the customer won't sign off on the design of the system without MTBF figures for all components, there is around 150 of them on this job, if we cant get…View more
|Date Last Visited||
2021-08-04 09:15 AM