PowerLogic T300 - issue with P5F30.cid file

[milica_dukic_]

Dear all,

we have an issue with importing P5F30 .cid file. 
When we try to save a configuration with imported .cid file there is a following warning. (picture attached)
Do anyone have the issue like that?

Thanks in advance,
Milica Dukić

[milica_dukic_]

we have an issue with importing P5F30 .cid file. 
When we try to save a configuration with imported .cid file there is a following warning. (picture attached)
Do anyone have the issue like that?

Thanks in advance,
Milica Dukić

[Shaogang_WANG · Accepted solution]

hello @milica_dukic_ ,

Please refer to the solution in link below. They are same problem.

Re: T300 - IEC61850 with P5F30 (error converting exi file) - Schneider Electric Community

[milica_dukic_]

Hello @Shaogang_WANG ,

While trying to change a firmware, this message appears - picture attached.

Could you help us with this please?

Thanks in advance.
Milica Dukić

[Shaogang_WANG]

Hello @milica_dukic_ ,

From the picture's message,  'checking firmware package', it seems the selected firmware package is unavailable, may be damaged or not signatured.

Please confirm the correct firmware package is selected, e.g. PowerLogic-P5-firmware-V02.xxx.xxx.zip, not the P5x.zip in the zip file PowerLogic-P5-firmware-V02.xxx.xxx.zip.