M580 P580320 timer events and io-events will not executed

[DamirAlfa]

M580 P580320 in timer events programm timer0 will not executed.

%S38 is MAST Task 1

%SW140=100 ms 

Seconds issue .

io events also dont working.

in module BMX EHC0200 Channel O is presset to evt0.

Please tell me how i need configure my project.

[Trinxs1]

Provide a copy of the project to this chat (.zef and .STU version) and we can have a quick look.  Otherwise you may need to talk to your local support team.

[DamirAlfa]

Now i can cal event evt0 only if i will set EHC_Ch0_FORCE_RESET by ST_INPUT_CAPT. But this solution looks like too slowly. Please help me just call task event directly.

[DamirAlfa]

Hi Trinxs1,

i have a issue with io-evente solved.

For all if intersting:

1. In HW-Config activate event --> evt 0 event=enable

for positive edge of IN_CAPT

2. x.EVT_CAPT_1_ENABLE=true

3. x.VALID_CAPT_1=true

4. x. FORCE_ENABLE=true

5. x.FORCE_REF trig by start to 1

create your programm in events/I/O Events/evt0.

Enjoy !