Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Panel Downstream Transformer
LayoutFAST User Group Forum
The LayoutFAST User Group is a place where Specifiers, Contractors, and Panel Builders share their User experience with the tool and ask Schneider Electric experts questions to solve their issues.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
the downstream panel cannot be connected to the transformer until the transformer's secondary distribution system is selected.
Please follow these steps below.
1. select the transformer
2. click the dropdown for Secondary Distribution System in the Properties
3. select the secondary voltage
Now when you try to circuit the panel, you will see the transformer as an option
the downstream panel cannot be connected to the transformer until the transformer's secondary distribution system is selected.
Please follow these steps below.
1. select the transformer
2. click the dropdown for Secondary Distribution System in the Properties
3. select the secondary voltage
Now when you try to circuit the panel, you will see the transformer as an option
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.