Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82124members
349631posts

Panel Downstream Transformer

LayoutFAST User Group Forum

The LayoutFAST User Group is a place where Specifiers, Contractors, and Panel Builders share their User experience with the tool and ask Schneider Electric experts questions to solve their issues.

Solved
SophieMBrause
Crewman
Crewman
0 Likes
1
298

Panel Downstream Transformer

In Revit, I can connect a panel upstream of a transformer, but I cannot connect another panel downstream from the transformer. What should I do?

Tags (1)

Accepted Solutions
Bowen
Crewman Crewman
Crewman

Re: Panel Downstream Transformer

the downstream panel cannot be connected to the transformer until the transformer's secondary distribution system is selected.

Please follow these steps below.

 

1. select the transformer

2. click the dropdown for Secondary Distribution System in the Properties

3. select the secondary voltage

 

Now when you try to circuit the panel, you will see the transformer as an option

 

secondary distribution system.PNG

See Answer In Context

1 Reply 1
Bowen
Crewman Crewman
Crewman

Re: Panel Downstream Transformer

the downstream panel cannot be connected to the transformer until the transformer's secondary distribution system is selected.

Please follow these steps below.

 

1. select the transformer

2. click the dropdown for Secondary Distribution System in the Properties

3. select the secondary voltage

 

Now when you try to circuit the panel, you will see the transformer as an option

 

secondary distribution system.PNG