Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Link copied. Please paste this link to share this article on your social media post.
Dear Martin Parks,
From your question:
How do i ensure the schneiderops.xml v.5 DDF file is installed?
In the DCE-client, this can be found from the menu Device -> SNMP Device Communication Settings -> Device Definition Files:
The latest schneiderops.xml DDF-file can be downloaded from the web resource, from where you downloaded the iso-image of the DCO-server.
Also, can there only be 1 DCO server added to DCE at any one time? i.e. i cant add the new server till the old one is removed?
You can add as many DCO-servers as you need (of course, taking into account restrictions on the number of nodes in DCE).
With respect.
Link copied. Please paste this link to share this article on your social media post.
Dear Martin Parks,
From your question:
Do you have a link to some instructions on adding DCO in to DCE?
Unfortunately, I do not know about the existence of such an instruction.
I have now been able to add the device in to DCE using SNMP v1, is there a way of setting it up so it uses SNMP v3?
I think you need to make the appropriate settings on the side of your new DCO-server. I draw your attention to your last question and to the answer:
With respect.
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.