DCE connected devices IP change

[GaborNovak]

If I change a few device IP address, it is possible to use this new IP address without to lose the sensor data which was collected.

[Shaun · Accepted solution]

Hi @GaborNovak,

In the menu Device -> SNMP Device Communication Settings -> Device Scan Settings

You can select a device, and use the "Edit Device Scan Settings" button to change the IP address for that individual device.

This will allow the existing association (and history) to be kept without re-discovering it as a new device (with no history).

[ATrabert]

Just to add to this, this feature was implemented in DCE 7.6.0.  In prior versions, you had to delete/re-add the device to change the IP

[Anonymous user]

---

@Shaun wrote:

Hi @GaborNovak, PrepaidCardStatus

In the menu Device -> SNMP Device Communication Settings -> Device Scan Settings

You can select a device, and use the "Edit Device Scan Settings" button to change the IP address for that individual device.

This will allow the existing association (and history) to be kept without re-discovering it as a new device (with no history).

---

Nice collection ….Keep posting such things.