DCE Threshold Alarm Configurations COPY/PASTE

[mardman63]

In DCE I'm setting up multiple Threshold Alarm Configurations on some new environment monitoring devices and want to simply setup the first set of Thresholds and then do a mask COPY / PASTE to the rest of the device IP's in the same group. Can this be done??

[Cory_McDonald]

Hi @mardman63,

It is not currently possible to copy and paste threshold configurations.  If these are APC devices you can do a mass configuration of the threshold on the device itself and make sure the device is in the notification policy (only 1 allowed per device).

Mass Configuration of APC Network Management Card type devices:
https://community.se.com/t5/DCE-configuration/Mass-Configuration-of-APC-Network-Management-Card-type...

Regards,

Cory

[mwitt]

this would be a great feature