Inquiry about DDF file for Altivar ATV900 in DCE

[SESA791690]

Hello team,

I would like to ask whether there is an available DDF (Device Definition File) for Schneider Altivar ATV900 that can be used in Data Center Expert (DCE).

Also, if there is no DDF available specifically for Altivar ATV900, is it possible to use the DDF for Altivar ATV600 as an alternative?

If the DDF is not available in the current catalog, is it possible to request one or create a custom SNMP/Modbus DDF for this device? Any guidance or reference documentation would be greatly appreciated.

Thank you in advance for your support.

[Cory_McDonald]

Hello Alfi,

Information on adding DCE DDFs can be found here: https://community.se.com/t5/DCE-device-configuration/Adding-or-updating-device-definition-files-DDFs...

Likely the 600 vs. 900 series Altivar units have too many differences to share a DDF file.  Although you can try to install a DDF and see if it works following the instructions in aticle linked above.

In summary, the DDF website can be found at https://ddf.ecostruxureit.com.  Search for existing DDFs there or if you can not find one that suites your needs, there is an option to contact support in the footer of the page.

Kind Regards,

Cory