Can I update the firmware on an AP8841 PDU that is slaved to a master PDU.

[DCIM_Support]

I used DCE to upgrade the master PDU but now I have a version mismatch from the master to the slave. Is there away to now upgrade the slave PDU in the rack?

Chuck

(CID:153945572)

[DCIM_Support]

Dear Chuck Caraway,

In your case this is an abnormal situation: if Network Port Sharing (NPS) is setup and running correctly, the firmware update of the master always ends with automatic firmware update of all its slaves.

So, please let us know what was the old firmware version on the master and slave?

What is the new version on the master now?

Show a couple of screenshots from web-GUI NMC2 master where you can see the firmware version of both rPDUs in chain.

With respect.

(CID:154402858)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.