Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84543members
353800posts

Download: Evo 360 Firmware Update Available!

Archives: Industrial Automation and Control

sesa269896
Schneider Alumni (Retired)
Schneider Alumni (Retired)

Download: Evo 360 Firmware Update Available!

Evolution 360 firmware version 1.4.10 is available for download from the Download Center now. It contains minor bug fixes and enhancements. See the firmware release notes for details to decide if you need to upgrade. You will need to use the OnCam Grandeye Configuration tool to upgrade firmware on EVO cameras.

Also, for your convenience the Oncam Grandeye Configuration Tool and the Oncam Grandeye 360-Degree Viewer have been added to the Download Center. Adding these tools to the Download Center creates a seamless Pelco experience for Evolution 360 camera customers. You can continue to download the OnVue Mobile App from the AppStore and GooglePlay.