Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84385members
353575posts

SU700inet Battery run time show 1~5 minute, battery capacity show 100%

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
shindvs_apc
Ensign
Ensign
0 Likes
3
474

SU700inet Battery run time show 1~5 minute, battery capacity show 100%

This was originally posted on APC forums on 4/25/2008


SU700inet Battery run time show 1~5 minute, battery capacity show 100%
how to solve problem?

Attachments

Accepted Solutions
shindvs_apc
Ensign
Ensign
0 Likes
0
475

SU700inet Battery run time show 1~5 minute, battery capacity show 100%

This was originally posted on APC forums on 4/26/2008


SU700inet Battery run time show 1~5 minute, battery capacity show 100%
how to solve problem?

See Answer In Context

Attachments
3 Replies 3
shindvs_apc
Ensign
Ensign
0 Likes
0
475

Re: SU700inet Battery run time show 1~5 minute, battery capacity show 100%

This was originally posted on APC forums on 4/26/2008


Is that software key or Hard key ? like security connector?
Whom to call in INDIA MUMBAI?
Thanks
Vijay

KVAr_apc
Captain
Captain
0 Likes
0
475

Re: SU700inet Battery run time show 1~5 minute, battery capacity show 100%

This was originally posted on APC forums on 4/26/2008


Turn off the notification beep from the software, then disconnect it from the computer.

Connect two 100W incandescent lamps or 200-250W worth of resistive loads and let the UPS switch to battery. Let it run on battery until it shuts off and clock the time it takes to shut down.

Plug it in, let it charge overnight and when you check the runtime with just the light bulbs connected, it should be reasonably close to what you clocked.

Failing that, go to APCC.com and choose your country, then select support and it'll give you a way to contact tech support.

shindvs_apc
Ensign
Ensign
0 Likes
0
476

SU700inet Battery run time show 1~5 minute, battery capacity show 100%

This was originally posted on APC forums on 4/26/2008


SU700inet Battery run time show 1~5 minute, battery capacity show 100%
how to solve problem?

Attachments