Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84695members
354074posts

Replace Battery LED Stays On After Replacing Battery on Back-Ups Pro 650

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
artmanphoto_apc
Crewman
Crewman
0 Likes
2
135

Replace Battery LED Stays On After Replacing Battery on Back-Ups Pro 650

This was originally posted on APC forums on 6/9/2008


Last week my Back-ups Pro 650 starting alarming with the Replace Battery LED constantly ON. I ordered a replacement battery RBC4 from the APC Online Store.

The battery arrived today and after installing the new battery the Replace Battery LED is still ON and the alarm still sounds periodically.

I did a hot swap of the battery without turning the Back-ups Pro power switch OFF.

Does anyone know why the LED stays on?

Thanks!


Accepted Solutions
artmanphoto_apc
Crewman
Crewman
0 Likes
0
135

Re: Replace Battery LED Stays On After Replacing Battery on Back-Ups Pro 65

This was originally posted on APC forums on 6/10/2008


EZ Button;

Thanks for your help! I turned the UPS off then back on and the replace battery LED went out. Have a great week!

Bill

See Answer In Context

2 Replies 2
EZ_Button_apc
Commander
Commander
0 Likes
0
135

Re: Replace Battery LED Stays On After Replacing Battery on Back-Ups Pro 650

This was originally posted on APC forums on 6/10/2008


The unit just needs to run a self-test to sense the new battery is present. Just power off and on the unit when you get a chance to initiate the test. If you have software installed you can usually run the test through there as well. If you don't run the test, it will automatically run it within the next 2 weeks by default.

Once you run it, that LED should clear up.

artmanphoto_apc
Crewman
Crewman
0 Likes
0
136

Re: Replace Battery LED Stays On After Replacing Battery on Back-Ups Pro 65

This was originally posted on APC forums on 6/10/2008


EZ Button;

Thanks for your help! I turned the UPS off then back on and the replace battery LED went out. Have a great week!

Bill