No Lights, One Side Working

[frokey_apc]

This was originally posted on APC forums on 6/26/2010

---

Hi. I have an ES 750 (BE750G, 380815x54656) that was working fine until a couple of weeks ago. Had a storm come in and power was off for several hours. Now, there are no lights on the unit and only the outlets on the surge side work. When I push the power button I get a single beep and the green light flashes for a few seconds. Then the light turns off and the unit gives a continuous beep that won't stop unless I push the power button again. What should I do at this point? Thanks!

[frokey_apc]

This was originally posted on APC forums on 7/6/2010

---

Thanks for your help and sorry for the delayed response. I was expecting an email notification when someone replied. Anyway, this unit is at my church, so I'll check it at my first available opportunity and reply back!

[frokey_apc · Accepted solution]

This was originally posted on APC forums on 6/26/2010

---

Hi. I have an ES 750 (BE750G, 380815x54656) that was working fine until a couple of weeks ago. Had a storm come in and power was off for several hours. Now, there are no lights on the unit and only the outlets on the surge side work. When I push the power button I get a single beep and the green light flashes for a few seconds. Then the light turns off and the unit gives a continuous beep that won't stop unless I push the power button again. What should I do at this point? Thanks!