Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84525members
353768posts

Continuous Raspy beep, battery voltage 13.5 VDC

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

jcrisman_apc
Cadet
0 Likes
0
40

Continuous Raspy beep, battery voltage 13.5 VDC

This was originally posted on APC forums on 7/14/2012


I have a Backup ES 750 that has started sounding a continuous raspy (not normal) beep and provides no power. LED is green, no other malfunction lights. Cannot turn the unit off with on off button. Beep continues even if nothing is plugged into it. Beep only stops when the battery is removed (of course) but starts again when battery is re-inserted (and unit turned on) even with nothing plugged into the unit. Battery voltage tests 13.5 VDC. After inserting a replacement battery, the unit operates normally. Software indicates the only power interruption occured one week before this beeping began. What gives - why doesn't the battery work if it tests fully charged and where did this ugly rasping sound come from?