Back-UPS 1000 NEW blinking battery icon

Anonymous user · ‎2021-06-28

Hi, just got a BRAND new APC Back-UPS device, plugged in the red wire, plugged in the power plug. Battery icon is blinking. So I let the device charge overnight but the battery icon is still blinking. No bars within the battery icon. It appears to not be charging. ?

Also, there's a black wire on the battery. Does it need to be connected, too?

Other ideas? Do I need to return the device for a different one?

Thanks.

BillP · ‎2021-06-28

Hi,

Both the red/positive and black/negative wires must be connected for the battery to work properly.

See Answer In Context

BillP · ‎2021-06-28

Hi,

Both the red/positive and black/negative wires must be connected for the battery to work properly.

Anonymous user · ‎2021-06-28

On 5/7/2020 4:20 PM, Bill said:
Hi,

Both the red/positive and black/negative wires must be connected for the battery to work properly.

That's it, Bill! Thank you. I recommend the image and instructions in the manual be updated. It refers to only a single wire, and only one wire is circled in the image, which led to my hesitation. But thanks again! Working properly now.