Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84690members
354063posts

BR900GI outlet 7

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
4
290

BR900GI outlet 7

This was originally posted on APC forums on 7/31/2013


I've connected a HUB to my BR900GI outlet No 7 as shown in the Manuel's page 2.

To this HUB I've connected only a Hard Disc via USB connector .

My iMac was in ShutDown position and the HUB and the HD  isn't connected to any product.

The HUB received and  deliver Power to the HD but  according to the BR900GI Manuel, it should not deliver power at all. 

Can you advise me please what is the problem ?

Thanks.

Ronen


Accepted Solutions
ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
290

Re: BR900GI outlet 7

This was originally posted on APC forums on 8/6/2013


Someone please ...

See Answer In Context

4 Replies 4
ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
290

Re: BR900GI outlet 7

This was originally posted on APC forums on 8/6/2013


Thanks .

Is OutletS #6 controlled by Master outlet ?

ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
290

Re: BR900GI outlet 7

This was originally posted on APC forums on 8/10/2013


?

ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
290

BR900GI outlet 7

This was originally posted on APC forums on 7/31/2013


I've connected a HUB to my BR900GI outlet No 7 as shown in the Manuel's page 2.

To this HUB I've connected only a Hard Disc via USB connector .

My iMac was in ShutDown position and the HUB and the HD  isn't connected to any product.

The HUB received and  deliver Power to the HD but  according to the BR900GI Manuel, it should not deliver power at all. 

Can you advise me please what is the problem ?

Thanks.

Ronen

ronen_apc
Lieutenant JG
Lieutenant JG
0 Likes
0
291

Re: BR900GI outlet 7

This was originally posted on APC forums on 8/6/2013


Someone please ...