BN600G will occasionaly emit a loud alarm sound for 5 seconds then shut off. y.

[daugust72]

BN600G will occasionally emit a loud alarm sound for 5 seconds then shut off. This can happen at any time of the day.  The on battery light will come on and go off when the alarm tone stops.  It doesn't beep is just says on for 5 or so seconds.  Battery test doesn't say to replace battery.

[Teken]

If the unit is connected to a computer running APC Power Chute Software. Provide the following logs: Event, Data, UPS, Diagnostics 

If Power Chute Software is (Not) installed do so now and allow the system to communicate with the UPS for a minimum of 72 hours or when the unit behaves the same way.

You may download the latest copy of (PCSS) from this APC Resource Link:

https://www.se.com/ca/en/product/SFPCSS/software-powerchute-serial-shutdown-unattended-graceful-shut...

You may refer to this APC FAQ to obtain the necessary logs:

https://www.se.com/us/en/faqs/FA159672/

Questions Ask . . . 👍