Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84812members
354267posts

APC 5000 to auto power-off and power-on BladeCenter H

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
malayo_apc
Crewman
Crewman
0 Likes
3
196

APC 5000 to auto power-off and power-on BladeCenter H

This was originally posted on APC forums on 7/1/2012


How would I configure APC 5000 to auto power-off and power-on BladeCenter H?

Especially for VMware vSPhere 5.0

Any specific configuration on each BladeServers & VCenter server?


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
197

Re: APC 5000 to auto power-off and power-on BladeCenter H

This reply was originally posted by Angela on APC forums on 7/16/2012


yes i believe thats the case. there is no way i know of to do this without the network management card. generally units 5000VA and above will ship with an included network management card. you might want to check on the back of your UPS and see if you see a network jack on there with a model listed as AP9619 or AP9631 to see if you have the network management card installed.

See Answer In Context

3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
0
197

Re: APC 5000 to auto power-off and power-on BladeCenter H

This reply was originally posted by Angela on APC forums on 7/2/2012


it looks like you'd need to ensure you have a network management card and powerchute network shutdown for any v-sphere support.

http://nam-en.apc.com/app/answers/detail/a_id/10380

malayo_apc
Crewman
Crewman
0 Likes
0
197

Re: APC 5000 to auto power-off and power-on BladeCenter H

This was originally posted on APC forums on 7/13/2012


it means that without the management card, what i'm trying to achieve won't happen?
does this device comes with the UPS or need to be bought separately?

BillP
Administrator Administrator
Administrator
0 Likes
0
198

Re: APC 5000 to auto power-off and power-on BladeCenter H

This reply was originally posted by Angela on APC forums on 7/16/2012


yes i believe thats the case. there is no way i know of to do this without the network management card. generally units 5000VA and above will ship with an included network management card. you might want to check on the back of your UPS and see if you see a network jack on there with a model listed as AP9619 or AP9631 to see if you have the network management card installed.