Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
PowerChute Personal Edition not installing
APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we?ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
This reply was originally posted by Bill on APC forums on 6/21/2018
Hi,
Performing a runtime calibration from PowerChute would not produce different results than running one from the LCD panel. When performing a runtime calibration the UPS must have a minimum of 30% load and will not run unless the batteries are fully charged.
To run a calibration for PowerChute Business Edition go to the upper left of the web interface and select the UPS the select Diagnostics.
Please see Schneider Electric FAQ FA284198
This reply was originally posted by Bill on APC forums on 6/21/2018
Hi,
Performing a runtime calibration from PowerChute would not produce different results than running one from the LCD panel. When performing a runtime calibration the UPS must have a minimum of 30% load and will not run unless the batteries are fully charged.
To run a calibration for PowerChute Business Edition go to the upper left of the web interface and select the UPS the select Diagnostics.
Please see Schneider Electric FAQ FA284198
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.