NMC2 v6.0.6 Temperature Scale

[BillP]

This question was originally posted by Dannon on APC forums on 7/15/2013

---

I have upgraded our network management card v2 firmware to the latest 6.0.6 code.  I noticed that all my temperature readings are in Celsius now.  How do I change back to Farenheit?

I can't find where to change it.

Thanks.

Danny

[BillP]

This reply was originally posted by Angela on APC forums on 11/7/2013

---

Thank you for taking the time to provide feedback. It is appreciated and noted.

[BillP]

This reply was originally posted by Angela on APC forums on 7/15/2013

---

This is now done on a per user basis and seems to be confusing for many on where to find it.

Go to Configuration->Security->Local Users->Management and click on the username for who's preference you want to change.

[BillP]

This reply was originally posted by Dannon on APC forums on 7/15/2013

---

I have upgraded our network management card v2 firmware to the latest 6.0.6 code.  I noticed that all my temperature readings are in Celsius now.  How do I change back to Farenheit?

I can't find where to change it.

Thanks.

Danny

[BillP]

This reply was originally posted by Dannon on APC forums on 7/16/2013

---

Thanks.  That was in an odd place.

[BillP]

This reply was originally posted by Angela on APC forums on 7/16/2013

---

Might I ask why its weird? Just wondering perhaps for future revisions if you feel there is a better place? I am always so jaded because I use it so often

[nfuller_apc · Accepted solution]

This was originally posted on APC forums on 12/1/2015

---

I will agree with Jeff on this one. I searched for about 5 minutes through places I thought the settings would be....and got no where.

After a quick Google search, I found this thread. 

Unless you have people from multiple countries looking at the temp sensor readings, you wouldnt put it under user profile settings. But thats just me. I only have a couple of sites and they are all in the US...same city even.