NMC2 compatibility

[reynos]

I have SmartUPS750 with an NMC2 (AP9630) card that's 5+ years old.

I'm looking for a replacement, it's for a complex home network with a few servers that will need auto-shutdown and an extended runtime. A 1000VA rack mount model will suffice I think. 

Question is - are any current model units compatible with the NMC2, or should I let it go and get a unit with a SmartConnect port?

Looking to keep the cost down.

[Teken · Accepted solution]

All current UPS are compatible with the NMC 2 (AP9630 / 9631) but is EOL and will have limited firmware releases.

The latest generation is the NMC 3 (AP9640 / 9641) which offers active support and firmware development. 

You’re wasting your time and finances buying a UPS that has Smart Connect. As this is a paid Service subscription after the initial free trial period.

Along with a reliance on a third party cloud service. 👎

In the worst case scenario purchase a unit that allows both Smart Connect and NMC. You’ll quickly find out Cloud First vs Local First makes absolutely no sense as it relates to security, privacy, long term costs, and the ability to do whatever you want via the NMC vs Cloud Connect! 🤦‍♂️

[reynos]

I hear you about local control and 100% agree. Thanks for the good info and advice 👍

[LarryK]

Also keep in mind that future firmware updates for the NMC3 require a subscription license (1, 3, 5, 7 years are available) which add significantly to the cost of the hardware itself.

[wasabi]

Sorry to hi-jack this thread, would anyone know if NMC2 is compatible with MGE STS UPSILON ? or must only use MGE JBus/Modbus Card 66061 ?
thank you.

[Teken]

You may refer to this hardware compatibility matrix chart:

https://www.se.com/ca/en/faqs/FA237786/

All other relevant information should be provided by the product page in question.

Questions Ask . . . 👍