APC SRV3KI error 0uF 114

[blackAces_apc]

This was originally posted on APC forums on 12/22/2020

---

Hi

UPS is on bypass mode due to fault, the error display was "0uF 114" i cant find the code in the user manual. Maybe, anyone knows what error is this. 

Thanks

[Fureisenjin_apc]

This was originally posted on APC forums on 1/19/2021

---

Hello did your issue get resolved. I got the same issue yesterday with one of our APC SRV3KI.

[blackAces_apc]

This was originally posted on APC forums on 1/20/2021

---

Nope, i already claimed for warranty ( for the 2nd time ). Hard reset will temporary solve the issue.

[BillP · Accepted solution]

This reply was originally posted by Gavan on APC forums on 1/22/2021

---

This can be resolved with a firmware update:

How to:

http://www.schneider-electric.com/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/416000/FA4160...

Firmware:

http://www.schneider-electric.com/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/416000/FA4160...

-Gavan

[blackAces_apc]

This was originally posted on APC forums on 1/26/2021

---

Hi 

Thanks I'll try this, hopefully is work. Give you update soon.

[blackAces_apc]

This was originally posted on APC forums on 3/12/2021

---

Hi Gavan

Just for the update, during firmware update a error was encountered. kindly see the attach screenshot. After few retry..update was successful from version 0.9 to 1.0. Hopefully the 0uF error will no longer be a issue.

0uF 114 error what is this all about?

[BillP]

This reply was originally posted by Gavan on APC forums on 3/12/2021

---

Sorry I'm not on the UPS hardware-side so I don't have any details on the issue I just know the update was released to fix it.

- Gavan

[blackAces_apc]

This was originally posted on APC forums on 3/15/2021

---

ah okies no worries, last thing, is firmware update is applicable to all SRV Model ( 1KVA to 10KVA )with 0uF Error?

[Alikabir84]

I have a SRV1KI and recently I got his error too, In my case I bought a new power supply to upgrade my system going from a 850 watts to 1000 watts power supply  system usage is well under 420 watts at load maximum. So when I tried to boot from this new corsair RM1000x supply the APC SRV1KI went into Bypass mode ( for the first time) and would not shutoff I had to press the main button for a few seconds to reset. Its been working fine with my OLD 850 watts supply which is also Corsair RM850x. LED display showed 0uF and code was 114? what is this code and why is the ups acting up when I trying to boot from a new supply while old one works, its only an increment of 150 watts and the load is not even applied. Also did this when "only the supply was connected without any equipment attached". 

Is this Firmware necessary for this fix? what really is this 114 code , it said on top to check manual and there isn't any information about it in the manual.

[Abimanyoo21]

Hi. I'm not able to open the link given. Is there any other way or any other links?

@BillP @Devans_apc 

[blacAces_apc]

Hi @BillP  is there any chances i can adjust the Contrast of the LCD Display for SRV? As of now its too hard to read the display. No instruction in the user manual.