Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

Close
Important Announcement: WELCOME to the new Schneider Electric Community! Community is now no longer part of Exchange, and is now rebranded under se.com. If you have any bookmarks and links saved, we request you to update them to ensure that you continue accessing our community from this new location. For any issues that you might encounter as part of this change, please reach out to SchneiderCommunity.Support@se.com, and the team will help to get your issues resolved.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
82165members
349745posts

Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

APC UPS Data Center Backup Solutions Forum

Schneider Electric support forum for Data Center UPS, software and services including our APC offers designed to share knowledge, installation, configuration, and general product use.

Solved
dsalzedo_apc
Ensign
Ensign
0 Likes
3
190

Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

This was originally posted on APC forums on 12/2/2013


I have an NMC2 running v6.0.6 FW in a Smart-UPS RT 8000 RM XL. I have been working on the notification configuration and somehow it is sending notifications to all configured enail recipients whenever it successfully completes a self-test. The event code is 0x0105. What is odd is this event is not exposed in the Web GUI as far as I can see, only the Self-Test started (0x0137) or the RFC1628 MIB UPS test completed (0x3603). I do have notifications configured for self-test failed (0x0106) but the test is passing OK.


I tried configuring all Informational group events, selecting all the email users then selecting "Disable notifications" but this has not fixed the issue.


I downloaded the config file and assuming the events marked as "0xXXXX" in the GUI match up with the events marked as "EXXXX" in the config they are configured as follows:


; UPS: Passed a self-test.

E0105=ES,E[:::],T[:::::],P[:::]

; UPS: Self-Test Failed

E0106=ES,E[:+-05S-60M-1:+-05S-60M-1:+-05S-60M-1],T[+-05S+60M-1:::::],P[:::]


; UPS: RFC1628 MIB UPS test completed.

E3603=E,E[:::],T[:::::],P[:::]


Can you please advise how i stop this unwanted behavior?


Thanks,

Daniel.


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
188

Re: Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

This reply was originally posted by Angela on APC forums on 12/4/2013


Sorry! I somehow linked the wrong thing. Here is the correct article -> Configuring clearing events with APC Network Management Cards <update for 6.X.X> | FAQs | Schneider ...

See Answer In Context

3 Replies 3
BillP
Administrator Administrator
Administrator
0 Likes
0
187

Re: Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

This reply was originally posted by Angela on APC forums on 12/3/2013


Your answer/disclaimer is here -> Network Management Card Device IP Configuration Wizard Error: This IP address could not be set. | FA...

And I just remembered I need to update that one too for v6.X.X firmware too. cry

It should hopefully be good enough to still address it for you while the body of the article explains the caveat with adjusting/disabling this self test passed event which we call a clearing event (since clears Self test failed).

Update (Dec 3): I had time this morning to update the article to apply to v6.X.X. Let me know if any issues.

dsalzedo_apc
Ensign
Ensign
0 Likes
0
187

Re: Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

This was originally posted on APC forums on 12/4/2013


Your link is to an article about running the Device IP Configuration Wizard to set the IP address and does not appear to pertain to my issue of clearing the Self Test email notifications. Am I missing something here?

Thanks,

Daniel.

BillP
Administrator Administrator
Administrator
0 Likes
0
189

Re: Help - Getting unwanted email notifications for E0105 UPS Passed a self-test

This reply was originally posted by Angela on APC forums on 12/4/2013


Sorry! I somehow linked the wrong thing. Here is the correct article -> Configuring clearing events with APC Network Management Cards <update for 6.X.X> | FAQs | Schneider ...